INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
LOMOND
SOLID LINES
D007918
Versión:
3
-18-
2.4.4.
BACK TO BAK KIT MOUNTING
1-
Fit the rear backstoppers as indicated in section 2.4.1.
2-
Screw on the ends of the set, 1 back to back side kit on each cabinet (see section 2.4.2 option 1, position 1). Mount on opposite sides. Use
TAE 4.2x13 Galvanized screws. Screw only in the enabled points.
3-
Put the cabinets together until the rear backstoppers come into contact. If the cabinet has wheels, apply brakes.
4-
Insert the top cover in the anchor grooves.
FLUSH BOTH SURFACES
Summary of Contents for LOMOND PI0C008640FDPD17
Page 4: ......
