INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
LOMOND
SOLID LINES
D003670
Versión:
3
-14-
2.4.
ASSEMBLY
When assembling lines that consist of more than one unit, the units should be
assembled in the correct order, i.e. their positions correspond with the numbers
indicated on the side of each unit (e.g. 4 in position 4, 3 in position 3.).
When the units' final positions have been determined, you may proceed to fit them
together, either manually or mechanically be careful to ensure that no pressure is
exerted on fragile components, such as glass, insulation glass or other weak
components.
Cabinets should be leveled both width and length and between them.
Summary of Contents for LOMOND PI0C008640FDPD17
Page 4: ......