manualshive.com logo in svg

Frontier ST7526, Operator'S Manual

Share
Download
Frontier ST7526 Operator'S Manual Download Page 24

LUBRICATION – EVERY 25 HOURS

Chute Rotation Gear

Lubricate the 

chute rotation gear

with automotive type oil (see

Figure 23).

Figure 23

Chute Rotation Gear

Chains

1. Position speed selector lever in first (1) forward gear.

2. Stand the snowthrower up on the auger housing end.

NOTE: When the crank case if filled with oil, do not leave
the snowthrower standing up on the auger housing for an
extended period of time.

3. Remove the bottom panel.

4. Lubricate the 

chains

with a chain type lubricant.

5. Wipe the 

hexshaft

and 

sprockets

with 5W30 motor oil.

NOTE: Clean all excess grease or oil found on the rubber
friction wheel or the disc drive plate.

CAUTION: Do not allow grease or oil to contact the rubber
friction wheel or the disc drive plate.

6. Install the bottom panel.

MAINTENANCE

24

Figure 24

Chain

Hexshaft – wipe with
5W30 motor oil before
storage and at the 
beginning of each season

WARNING: If the disc drive plate or rubber
friction wheel come in contact with grease or
oil damage to rubber friction wheel will
result.

If grease or oil come in contact with the disc
drive plate or friction wheel, make sure to clean
the plate and wheel thoroughly with an alcohol
base solvent.

Chain

Summary of Contents for ST7526













































Reviews:

No comments

Brands by name

Popular brands

Load more brands