EN
2
25.
When the treadmill is not being used, the power cord should be unplugged, and the safety
pull pin removed.
26.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
27.
Make sure the treadmill has stopped before folding. Please don’t operate it after folding the
treadmill.
Assembly
Step 1:
1.
Open the package, take out all parts and place the main frame combining on the flat ground.
(DO NOT CUT OFF THE PACKING STRAPS yet)
Step 2:
1. Cut down the straps when the main frame was place
well (NOTE: Don´t move it anymore)
2. Lift the combining of upright tube (3L/R), and com-
puter frame (4) following the direction of the arrow as
shown.
3. Lock the upright tube (3L/R) on the bottom frame (1)
with the Allen bolt (32), Allen bolt (35) and lock washer
(53). DO NOT TIGHTEN THE TWO ALLEN BOLTS
NOW.
4. Lock the computer frame (4) tightly on the upright tube
(3L/R) with Allen bolt (35) and lock washer (53). NOW
TIGHTEN ALL THE BOLTS.