OPERATION
OM 0401-A
19
O
PTIMUM
P
ERFORMANCES
IMPORTANT: The hydraulic motors of the rotary broom must have a breaking in period. If it is
not respected, the warranty could be voided. The breaking in period must follow these steps:
1- 15-30 minutes of operation at half engine speed (tractor RPM around 1250).
2- Check for unusual noises coming from the motors. If everything sounds normal, the
load and engine speed can be increased.
The new HP2025 and HP2134 pumps are equipped with a safety system to prevent the
hydraulic oil from overheating. When the hydraulic block is not power supplied, the oil is in
recirculation mode meaning that the equipment will not function. To power the block, the
ignition key must be in the "ON" or "START" position. If the system remains in the
recirculation mode, refer to the "Troubleshooting" section at page 26.
G
ENERAL
P
REPARATION
1.
Read the operator’s manual carefully
before using the tractor and debris
blower. Be thoroughly familiar with the
controls and proper use of the
equipment. Know how to stop the unit
and disengage the controls quickly.
2.
Make sure the impeller operates freely.
3.
Check the shear bolt on the PTO, for
proper tightness.
4.
Wear adequate winter outer garments
while operating equipment.
WARNING: To avoid serious injuries or
death
:
•
Do not allow bystanders near working area.
•
Do not allow anyone to ride on debris blower.
•
Before cleaning, adjusting or repairing the
debris blower: bring the tractor to a complete
stop, wait for all movement to stop, apply
parking brake, lower the implement to the
ground, shut off the engine and remove the
ignition key.
•
Never put any part of your body under the
debris blower while making adjustments.
WARNING: To avoid serious injuries:
•
Always operate the debris blower from the
operator's seat only. Never allow anyone to
ride on the machine.
•
Operate the debris blower at a speed that
matches the working conditions. Be extremely
careful when working on banks or uneven
terrain.
•
Always wear protective eyewear when
operating the debris blower.
Summary of Contents for BL2130
