Frontier BL2130, Operator'S Manual

Page: 20 / 44

ASSEMBLY
OM 0401-A
18
1
2
3
Figure 9
Figure 7
Figure 8
3
4
2
1
5
Figure 10
Removing Debris Blower from Tractor
(Figures 7 to 10)
1. Set parking brake and turn engine off.
2. Figure 7: Direct the wheel supports
(item 2) along the housing support tube
(as illustrated) and lock in position with
three round wire lock pins (item 1), that
are attached to the debris blower
housing (item A).
3. Figure 8: Disconnect the male coupler
(item 1) of the debris blower hose from
the female coupler (item 2) of the
hydraulic pump hose. Disconnect the
female coupler (item 3) of the debris
blower hose from the male coupler
(item 4) of the hydraulic pump hose.
Install the dust caps (item 5) on each
coupler (items 1-2-3-4).
4. Figure 9: Remove the hydraulic hoses
(items 1-2) from the front support of the
loader (item
3). Roll up the hoses
around the universal hitch so they don't
drag on the ground.
5. Figure 10: Remove the two linchpins
(item 5). Disengage the two universal
hitch pins (item 3) from the holes of the
front loader (item 4).
6. Figure 10: Disengage the two universal
hitch hooks (item 1) from the loader
brackets (item 2). Back away slowly.
IMPORTANT: To avoid damages to the
debris blower, retorque all bolts after the
first 10 hours of operation.