If the burner will not light after several attempts, a burner can be match lit. If you have just attempted to
light the burner with the igniter, allow 5 minutes for any accumulated gas to dissipate before attempting
to match light the grill.
Keep your face and hands as far away from the grill as possible. Insert a lit extended match or extended
length lighter through the cooking grids to the burner you choose to light. Press the burner control knob
and rotate left to the HI setting. Continue to press the knob in until the burner igniters. The burner should
light immediately. If the burner does not light in 4 seconds, turn the knob OFF, wait 5 minutes and try
again.
Always turn the control knobs to the OFF position when not in use.
If the grill will not light after several attempts, check the Troubleshooting section of this manual.
MATCH LIGHTING THE GRILL
13
Insert a lighted match in the
end of the lighting rod then
insert through the cooking
grids to the burner you
choose to light.
