Fronteq FS0507T, Operation And Maintenance Manual

Page: 16 / 48

FS0507T PN 60711000162
damaged, and use other than the original purpose.
Note
Use genuine parts
●
Failure to use genuine parts can pose a safety and functional barrier. When you need
to replace parts, you must use the manufacturer's designated genuine parts.
Note
Prohibition of transformation
●
Do not modify this machine without the written commitment of the company.
Retrofitting can
have a negative impact on strength and safety and undermine safety.
●
The company is not responsible for personal accidents and malfunctions caused by
unauthorized modifications.
Note
Pay attention to the use of liquids and fire
●
There is a danger of fire when the fire is close to the oil. In addition,
the battery generates hydrogen gas, and the battery solution contains
dilute sulfuric acid. Incorrect use can cause a personal accident to cause
a fire. Please strictly observe the following items.
·
Do not smoke near the hydraulic tank and battery, and be close to
sparks or other fires.
·
When replenishing the oil and the battery replenishing solution, please
do so in a place where there is no fire and turn off the main power. In
addition, do not mistake the type and capacity when replenishing.
Incorrect supply can cause malfunction or damage.
·
Oil or battery solution may cause inflammation when it enters the eyes and contacts
the skin. Use protective goggles or protective gloves when using. In addition, you must
not drink it by mistake. Please wash away immediately when entering the eyes or
touching the skin. Please consult a doctor if you accidentally drink or burn.
·
Please cover the lid after replenishment and wipe it clean when spilled.
·
When using lighting equipment for inspection, maintenance, and replenishment, use
explosion-proof specifications and keep them away from the machine.
·
When using a sander or welding that may cause sparks, keep objects that may catch
fire to a distance.
·
When combustibles (wild grass, fallen leaves, paper, cloth, etc.) are deposited on or
near the machine, please remove them before use.
·
Do not weld or cut the hose or piping. In particular, there is internal pressure in the
Hydraulic circuit, please be careful. When checking and maintaining hoses and piping,
please release the internal pressure beforehand.
·
In order to prevent short circuit of the electrical system and leakage of the piping,
check the wiring and piping before use.
·
Store the oil in a well-ventilated, fixed place that is not accessible to non-related
personnel.