Fronius WF 25i Case D200, Operating Instructions Manual

Page: 35 / 68

Number Control Indicator Function
(4) EasyJob button
for saving, opening and deleting EasyJobs.
The LED in the button indicates that EasyJob is selected
How it works:
-
Press and hold the button for 3 seconds = save EasyJob
(all current settings are saved). After saving, the LED in the
button lights up and 'Store' is shown on the display
- Press and hold the button for 5 seconds = delete EasyJob.
'Store' is shown on the display after 3 seconds, 'Clear' is
shown after 5 seconds and the LED in the button goes out
- Press the button = select the saved EasyJob
(5) Welding process button
for selecting the welding process
-
PULS SYNERGIC - MIG/MAG pulse synergic welding
- SYNERGIC - MIG/MAG standard synergic welding
- MANUAL - MIG/MAG standard manual welding
- JOB - Job Mode
- STICK - Manual metal arc welding
- SP (SP = special programs: LSC, PMC, TIG, etc.) -
Depending on which package of functions is enabled, vari-
ous welding processes can be selected. Press the button to
see the available welding processes shown on the display
one after the other
(6) Mode button
for selecting the operating mode
2-step mode
4-step mode
Depending on the function package, various special operating
modes can be selected. Press the button to see the available
operating modes shown on the display one after the other
(7) Adjusting dial with turn/press function
- for changing the material thickness, current, wire feed
speed and special function parameters
- for selecting and changing parameters in the Setup menu
Number Indicator Function
(8) Hold indicator
the actual values are displayed automatically at the end of each welding
operation (current, voltage, wire feed speed, etc.). The actual values are
displayed through the HOLD indicator lighting up.
35
EN