Fronius Primo 10.0-1 208-240, Installation Instructions Manual

Page: 7 / 52

NOTE!
Fronius will not bear any costs for production downtimes, or for installations,
etc., which may arise due to a detected electric arc and its consequences.
Fronius accepts no liability for fires which may break out despite integrated arc
detection/interruption (e.g., due to a parallel arc).
NOTE!
Before an inverter can be reset following a detected electric arc, check the en-
tire affected photovoltaic system for any damage.
Intended Use
The inverter is designed exclusively to be connected and used with nongrounded
solar modules. The solar modules cannot be grounded at either the positive or
negative pole.
The solar inverter is designed exclusively to convert direct current from solar
modules into alternating current and feed this power into the public grid.
The following are deemed not to be in conformity with its intended purpose:
- utilization for any other purpose, or in any other manner
- alterations to the inverter that are not expressly recommended by Fronius
- installation of components that are not expressly recommended or sold by
Fronius.
The manufacturer is not responsible for any damage resulting from improper use.
All warranty claims are considered void in such cases.
Proper use also means
- carefully reading and obeying all the instructions and safety and danger no-
tices in the operating instructions
- carrying out all the specified inspection and servicing work
- installation as per operating instructions.
When configuring the photovoltaic system, make sure that all photovoltaic sys-
tem components are operating completely within their permitted operating
range.
All measures recommended by the solar module manufacturer for maintaining
solar module properties must be followed.
Utility company regulations regarding grid power feed must be followed.
7
EN-US