-
Irritation or burning of the skin due to contact with cleaning electrolyte or Print elec-
trolyte
-
Danger of serious eye damage due to contact with cleaning electrolyte or Print elec-
trolyte
-
General hazards when handling chemicals
Observe the safety data sheets of the cleaning and Print electrolytes!
-
Electrical risks from grid current and cleaning current
-
Harmful vapors
Individuals working on the workpiece during the cleaning process must wear suitable
work clothing with the following properties:
-
Resistant against acids and chemicals
-
Insulating and dry
-
Covering the entire body and in good condition with no damage
Work clothing includes the following:
-
Tightly fitting safety goggles (eye protection)
-
Rigid, wet-insulating footwear
-
Protective gloves (hand protection): impermeable, resistant to acids and chemicals
-
Breathing protection
The required condition of work clothing and protective measures are indicated on the
safety data sheet of the cleaning and Print electrolytes.
Immediately remove work clothing contaminated with cleaning agent!
-
Do not eat or drink when working with the device
-
Keep cleaning and Print electrolytes away from food, beverages, and feedstuffs
-
Wash hands before breaks and at the end of work
Keep persons, especially children, and those who are pregnant or unwell, away during
the operation of the devices and during the working process. However, if persons are in
the vicinity:
-
Inform them of all risks
-
Provide suitable protective equipment
or
-
Construct suitable protective walls or curtains.
Notes on the cor-
rect handling of
the cleaning and
Print electrolytes
The following points must be observed when handling the cleaning and Print electrolytes.
For exact data, please refer to the respective safety data sheets. For current safety data
sheets, use the following link:
7
EN-US
