Fronius LaserHybrid SB 360i, Operating Instructions Manual, Page: 89 / 104

Removing the
Laser Optics
1
2
2
4
3
3
1
1
Loosen the Allen screws
M5 x 20 mm, size 4 mm
Do not remove the screws.
It must be possible to move the clamp.
2
Loosen the Allen screws
M5 x 25 mm, size 4 mm
3
Remove the screws
4
Remove the bracket
CAUTION!
If dropped, the laser optics unit can be damaged to such an extent that it is
rendered unusable.
▶
Remove and handle the laser optics carefully.
5
4
4
5
Remove the Allen screws
M5 x 20 mm, size 4 mm
The screws are needed again when
the new laser optics unit is installed.
6
Remove laser optics from the laser
welding head
Installing the
laser optics
CAUTION!
If dropped, the laser optics unit can be damaged to such an extent that it is
rendered unusable.
▶
Insert and handle laser optics carefully.
89
EN-US