Fronius LaserHybrid SB 360i, Operating Instructions Manual

Page: 45 / 104

1
Mount upright consoles
2
Mount cooling unit on upright console
3
Connect power source to cooling unit
4
Set up welding wire drum
5
Mount WF MOUNTING drum onto the welding wire drum
6
Set up and connect unwinding wirefeeder
7
Connect power source with robot control
8
Connect the remote control
9
Mount the wire buffer with mounting plate
(e.g. on the hosepack holder extension arm or using balancer)
Set up laser welding head:
10
Mount WF 60i Robacta Drive CMT on the laser welding head
11
Mounting the laser welding head on the robot
12
Mount and Connect SplitBox SB 360i LaserHybrid
13
Connect unwinding wirefeeder and wire buffer by means of control line
14
Connect CrossJet
15
Connect the LaserHybrid hosepack to the laser welding head
16
Connect the wirefeeding hose to the wire buffer and the laser welding head
17
Install wirefeed rollers
18
Connect laser optics and additional extraction system
19
Equip welding torch
20
Place LaserHybrid hosepack on the robot
21
Thread the wire electrode
Other activities before start-up:
22
Adjust the laser welding head
23
Create a reference program
24
Signal sequence for LaserHybrid welding
25
Measures before start of welding
26
Establish ground earth connection between workpiece and power source
45
EN-US