Fronius LaserHybrid SB 360i, Operating Instructions Manual

Page: 99 / 104

Technical data
WF 25i LaserHy-
brid 90° 10 kW
FW (Laser Weld-
ing Head)
Weight (without laser optics) 19 kg
Laser optics Trumpf BEO D70/F300
Max. laser performance on the workpiece 10 kW
Max. current carrying capacity of the welding torch
(100% D.C. at 40°C)
M21 (EN439)
C1 (EN439)
360 A
360 A
LaserHybrid
hosepack MHP
360i LH
Max. welding current (100% D.C. at
40 °C) 360 A
Wire diameter 1.0 - 1.6 mm
Voltage rating (V-Peak) 141 V
Cooling system Liquid cooling
Coolant Original Fronius coolant
Hosepack length 4.2 m / 7.5 m
Lowest cooling capacity as per
IEC 60974-2, depending on the hosepack
length 1400 / 1500 W
Coolant pressure min./max. 3.0 / 5.0 bar
Minimum flow of coolant 1.0 l/min
This product meets the requirements set out in standard IEC 60974-7/-10 Cl.A.
SB 360i LH
Supply voltage 24 V DC / 60 V DC
Nominal current 0.5 A / 0.8 A
Welding current at 10 min / 40 °C (104 °F) 40% D.C.* 500 A
60% D.C.* 450 A
100% D.C.* 360 A
Maximum pressure of shielding gas 7 bar/101.53 psi
Coolant Original Fronius
Maximum pressure of coolant 5 bar/72.53 psi
Protection class IP 20
Mark of conformity CE
Dimensions l × w × h 560.4 x 334.93 x 113 mm
22.06 x 13.19 x 4.45 in.
Weight 9.6 kg/21.16 Ib
*) D.C. = duty cycle
99
EN-US