Fronius Eco 15.0-3-208 US, Installation Instructions Manual

Page: 42 / 64

42
Opening and
Closing the De-
vice Opening the Device:
Set the DC disconnector (1) to the 0
position
Loosen 4 screws 5x25 TX25 (2) and
remove Datcom lid
If applicable, disconnect all plug
connections
Loosen 2 screws 5x25 TX25 (3)
Lift the inverter in the Datcom area and
loosen the connection to the mounting
bracket
Detach the inverter from above
Remove EMC bracket, loosen 6
screws 5x16 TX25 (4) and remove po-
wer stage set lid
(1) (2) (2)
WARNING! Observe the safety
rules (see the beginning of the
"Safety" section)
1
2
(3) (3)
3
4
(1)
1
2
NOTE! To avoid damage to the
base shell, the inverter must not
exceed an angle of 11°.
WARNING! Wait for the capacitor
discharge time before carrying out
further steps.
5
6
(4)
(4)
(4)
(4)
(4)
(4)
7