Fronius Eco 15.0-3-208 US, Installation Instructions Manual

Page: 41 / 64

41
EN-US
Installation Instructions
Safety
A safety inspection must be carried out after the replacement, modification, maintenance
or repair of a component (see section "Safety Inspection").
ESD Guidelines
No guarantee or warranty claims can be made in respect of any improperly handled elec-
tronic component or PC board.
WARNING! An electric shock can be fatal. Before opening the device
- Set power switch to - O -
- Disconnect the device from the grid
- Attach a clear warning sign advising others not to switch the power source
back on
- Use a suitable measuring instrument to ensure that electrically charged com-
ponents (e.g., condensers) are discharged
WARNING! An electric shock can be fatal. Danger of residual voltage from ca-
pacitors. Wait until the capacitors have discharged. Discharge takes 6 minutes.
Additional information on discharge time can be found in the operating instruc-
tions and in the safety information on the inverter.
NOTE! Requirements for electrical installations may be subject to national stan-
dards and regulations, and these must be followed accordingly.
NOTE! Observe ESD guidelines when handling electronic components and PC
boards. This primarily applies to ESD-compatible
-
Packaging
- Work surfaces
- Floors
- Seating
- Grounding options
- Handling