Fronius Datamanager Galvo, Installation Manual

Page: 17 / 76

15
EN-US
Installing Fronius Datamanager in Fronius Solar Net
Installing Invert-
ers with Fronius
Datamanager in
Fronius Solar Net
* Terminating plug, if only one inverter with Fronius Datamanager is linked to a PC
or if there is no further Solar Net subscriber on the Solar Net connection socket.
** Solar Net Cable, if an inverter with Fronius Datamanager is linked to a PC and oth-
er DATCOM components
Insert and lay the Ethernet cable in the inverter like a data communication cable in ac-
cordance with the operating instructions for the inverter.
Insert the Ethernet cable into the LAN connection socket.
Insert the Ethernet cable into the PC/laptop or into a suitable network connection sock-
et.
If only one inverter with Fronius Datamanager is being linked to a PC:
Insert a terminating plug into the Solar Net IN connection socket and the Solar Net
OUT connection socket
If other DATCOM components are connected to the network, besides the inverter with
Fronius Datamanager:
Insert the Solar Net cable into the Solar Net IN connection socket and the Solar Net
OUT connection socket.
Connect the other DATCOM components.
IMPORTANT! A terminating plug must be inserted into every empty Solar Net connec-
tion socket of the last DATACOM component.
CAUTION! DATCOM components and/or the PC/laptop may be seriously dam-
aged if the Ethernet or Solar Net cables are connected incorrectly to the Fronius
Datamanager.
-
The Ethernet cable should only be inserted into the LAN connection socket
(colored blue).
- The Solar Net cable should only be inserted into the inverter Solar Net IN or
Solar Net OUT connection sockets.
DATCOM
IN OUT
4
5
IN
2
6
3
1
* *
** **
1
2
3
4
5