Fronius Datamanager Galvo, Installation Manual

Page: 18 / 76

16
Installing Fronius Datamanager – Overview
Safety
Starting Up for
the First Time Insert Fronius Datamanager into the inverter
Insert blue Ethernet cable into Fronius Datamanager (LAN connection socket)
Insert terminating plug into Fronius Datamanager (Solar Net IN connection socket)
Insert blue Ethernet cable into the PC/laptop
Turn off WLAN on PC/laptop (to avoid network conflicts)
Adjust network settings for Fronius Datamanager on PC/laptop:
"Obtain an IP address automatically (DHCP)" must be activated
Switch IP switch on Fronius Datamanager to position - A -
Close the inverter and switch it on
After about 1 minute, open the browser on the PC/laptop and enter the following ad-
dress (web server works with Internet Explorer 9 or higher, Chrome or Firefox):
http://169.254.0.180
The start page of the Commissioning Wizard appears.
WARNING! Operating the device incorrectly can cause serious injury and dam-
age. Do not use the functions described until you have thoroughly read and un-
derstood the following documents:
-
these operating instructions
- all operating instructions for system components, especially the safety rules
NOTE! Installing Fronius Datamanager requires knowledge of network technolo-
gy.
See section "Inserting Fronius Datamanager into an inverter"
See section "Installing Fronius Datamanager in Fronius Solar Net"
1
2
3
4
5
6
7
8
9