8
NOTE
The network configuration of the ‘Fronius Datalogger Web’ Datalogger
requires knowledge of network technology.
If the ‘Fronius Datalogger Web’ is being integrated into an existing network, the ‘Fronius
Datalogger Web’ address must be adapted to the network.
e.g.: Network address range = 192.168.1.x, subnet mask = 255.255.255.0
-
An IP address between 192.168.1.1 and 192.168.1.254 must be assigned to the
‘Fronius Datalogger Web.’
-
The IP address selected may not be already assigned in the network.
-
The subnet mask must correspond to the existing network (e.g. 255.255.255.0).
If the ‘Fronius Datalogger Web’ will be sending service messages and/or data to ‘Fronius
Solar.web,’ then a gateway address and a DNS server address must also be entered.
‘Fronius Datalogger Web’ uses the gateway address to access the Internet. The IP
address of the DSL router can be used as a gateway address, for example.
Important
-
‘Fronius Datalogger Web’ may not have the same IP address as the PC / laptop.
-
‘Fronius Datalogger Web’ cannot connect by itself to the Internet. A router must be
used for a DSL connection to the Internet.
‘Fronius Datalogger Web’ Network Configuration
Requirements
General
1.
Install ‘Fronius Datalogger Web’
Install ‘Fronius Datalogger Web’
The network configuration function patented by Fronius enables the ‘Fronius Datalogger
Web’ to:
-
establish an easy connection between ‘Fronius Datalogger Web’ and the PC / laptop
-
make settings
-
display important system data
‘Fronius Datalog-
ger Web’ Network
Configuration
Summary of Contents for Datalogger Web
Page 2: ......
Page 4: ...ud_fr_st_et_01382 012007 ...