1-16
Mounting of the optional fan P32.0228:
-
Unscrew the motor housing and remove it.
-
Disconnect the plugs of the motor P32.0213 from the circuit board. Remove the motor.
-
Insert the fan N51.5464 at the prepared place. The cable shows up to the right.
-
Attach the corresponding hole of the fan to the protruding pin of the motor housing P32.8103.
-
Attach the fan with the supplied screws N1.7221.
-
Plug in the connector on the shown place of the circuit board.
-
Put in the motor and connect it. Take care that the colours of the connecting cables are conform to the
connector sockets. The gear wheels of the motor have to touch their counterparts correctly.
-
Before closing the motor housing take care that no cables can be jammed or damaged.
-
Assemble the motor housing.
Connecting plan
Motor housing
P32.0213
P32.0228
P32.8103
attach fan to the pin
N51.5464
N1.7221
Purchase at Allstrap (866) 779-2673