FS4.1333-Manual-32.11XX.XXX.V04-EN08_R2.doc
FROMM
it is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2017
website: www.fromm-stretch.com
29
ASSEMBLY SEQUENCE
16. Check the functionality of the PROXIMITY SENSOR (1) for bottom / top-wraps and zero position
(Fig. 1)
Fig. 1
17. Check the functionality of the TERMINAL / OVERCURRENT / CIRCUIT / BRAKERS (Fig. 1 & 2)
Fig. 1 Carriage
Fig. 2 Turntable
ATTENTION!
After the first installation
Follow procedure below before starting the machine
-
Control if the emergency button is free;
-
Turn on the machine;
-
Press the reset button;
-
Wait 5 seconds and than make the first rotation in manual mode;
-
If the turntable rotates, follow procedure below.
After installation or maintenance of the machine follow procedure below to check the efficiency of the
safety devices, such as:
Interlocking of the crush-proof interlocked operator guard
Emergency button
Check for the efficiency of the mobile interlocked crush-proof guard of the carriage
- start the machine
- trigger the interlocked operator guard
Check that the carriage inverts its running direction for approximately 3 seconds and that the
turntable starts slowing down and stops within a few seconds.
Check for the efficiency of the mushroom-head button (Emergency stop)
- start the machine
- press the emergency mushroom-head button
Check that the machine stops within a few seconds.
1
