FS1.2109-Manual 32.42XX.XXX.V01-V02-V03-EN08_R2.doc
FROMM
it is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2017
website: www.fromm-stretch.com
9
SAFETY INSTRUCTIONS
When installing the machine, as a precaution, always check that the controls and safety systems are
correctly mounted and operating efficiently. If any malfunctions are noted, immediately stop the
production cycle and ask the authorized technical service to intervene.
Examine the data-plates. lf they are in poor condition, replace them with utmost urgency, strictly and
directly contacting the authorized technical service or the Manufacturer
The requirements, as mentioned in chapter
MAINTENANCE INSTRUCTIONS
should be satisfied
during adjustment and maintenance activities.
People should not step on to means of transport, unless indicated clearly otherwise.
People should not find themselves above the means of transport.
Do not place tools and components on the machine.
Safety devices should not be bridged and put out of operation.
The manufacturer will only make the machine ready for operation, when the electrical main
connection satisfies the standards applicable in the country of delivery.
The supplier will do the training of the operating personnel. If not, the training will have to be done
properly by the company that takes care of the installation.
The machines are designed and implemented conforming to the safety laws in force.
Consequently, no intrinsic fire risks are envisaged when the machine is used normally.
As such, the equipment provided against the possibility of
fire outbreaks
inside the company are
sufficient for any problems caused by the material used for the process.
In the event a fire breaks out and fire extinguishers are used, it is recommended that extinguishers
filled only with CO2 be used, so as not to damage both the equipment on the machine and the
wiring system.
In the event of
flooding
, it is compulsory that all the power supplies be disconnected before
entering the room in which the machine is installed.
In the event the wrapping machine was subjected to a flooding, contact the Customer technical
service of MANUFACTURER.
You are strictly recommended not to work in the machine while wearing unsuitable clothing
(unbuttoned, ample garments) or personal objects (bracelets, watches, rings, etc.).