13
a480man.en_teil2
10 OPERATION
10.1 Feeding the strap
The strap is fed through the seal, around the
package to be strapped and again through the seal.
The strap end is then bent. The operator then
tensions the loose loop manually making sure that
the bent strap end is adjacent to the object to be
strapped.
10.2 Introducing the tool
The upper strap is held with the left hand; the right
hand lifts the air motor and introduces the tool from
the right to the left and from the rear to the front. The
air motor is then released.
10.3 Tensioning the strap
The tension valve lever A48.1232 is pressed down.
The lever is caught completely and the strap is
tensioned until the air motor stalls. If the cycle has to
be interrupted the catch A48.1234 has to be pressed
to the left.
Always wear safety
glasses with side shields
which conform to ANSI
Standard Z87.1.
When handling strap,
always wear protective
gloves.
