❒ Fit the flue pipe compensator (1) with its fibreglass seal (2) and screws complete
with spring washers and spacer washers to the induced draught fan.
➥ Also screw on the earthing wire (3) (supplied) with the toothed washer as po‐
tential equalisation.
❒ Fit the induced draught fan with its fibreglass seal (2) on the flue pipe compensa‐
tor (1) with the nuts and the spring washers and spacer washers to the induced
draught bracket.
➥ Also screw on the earthing wire (3) (supplied) with the toothed washer as po‐
tential equalisation.
➥ Position the rubber buffers (4) of the induced draught fan in the slots in the in‐
duced draught bracket.
❒ Fit flange of the induced draught bracket complete with the ceramic fibre seal to
the back of the heat exchanger.
❒ Adjust the induced draught bracket with the adjustable feet.
4
Installation
Installing the boiler
44
Fröling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
