Installation
Assembling the Pellet Boiler
Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestrasse 12, A-4710 Grieskirchen
Page 19
Tel +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600 [email protected] www.froeling.com
M0930408_en
3
3.3
Assembling the Pellet Boiler
3.3.1
Removing the suction cyclone
U
Remove sound insulation cover
U
Open the clamps on the suction unit container and lift the cover
´
The induced draught unit set is in the suction unit container
3.3.2
Fitting the induced draught fan
U
Remove pre-installed cover plate
U
Unscrew pre-installed nuts and
spacer washers
U
Attach and fix the ID fan as
illustrated
The straight edge must be up.
U
Join both cables of the ID fan with the pre-installed cables
U
Push the cable behind the cladding and put back the cover plate.
Summary of Contents for P4 Pellet 15
Page 2: ......