Fröling S4 Turbo 15, Operating Instructions Manual

Page: 30 / 80

4 | Operating the System
30 B1510622_en | Operating instructions Firewood boiler S4 Turbo
r
Leave the pre-heating chamber door open for approximately 5 minutes
Ä A bed of embers forms
r
Close the pre-heating chamber door and the insulated door
Ä
NOTE : Wait for the message on the boiler display
4.5 Heat up the firewood with automatic ignition
NOTICE
Fill fuel loading chamber for later manual / automatic ignition
Premature self-ignition of the firewood by residual heat / temperature of the
combustion chamber possible
Therefore:
r
Completely remove residual embers from the combustion chamber
r
Allow the combustion chamber to cool down
r An ash layer up to the middle row of holes in the combustion chamber guards
facilitates the ignition process
Activate the function “automatic ignition” to automatically heat up the boiler.
r
Navigate to the “
Ignition
” menu and set the
“Automatic ignition”
parameter
to
“YES”
r Open the insulated door and the fuel loading door
Ä
The induced draught fan switches on
r
Check the combustion chamber for residual embers
Ä Residual embers could ignite wood before the automatic start.
r
If necessary, remove all ash
Ü "Checking the ash level in the boiler" [ } 50]
r Check the opening of the igniter tube (A) for dirt and clean if necessary
r
Fill the fuel loading chamber in accordance with the output