26
If several freezers are installed on the same electrical network, the start-up time delay can be used to start the units in
turn in order to avoid momentary overload.
Start-up delay.
Set the delay before the unit starts up.
When the freezer is powered up, the first stage compressor will only start after this
delay.
Configuring remote alarm time offset (for door alarms only)
When using remote alarm, a time delay offset can be set to prevent unnecessary alarm notification during routine freezer
use.
Set the time offset for the door alarm notification to the central monitoring station
(e.g. 00h02min00s).
7.9
« F
ACTORY
»
MENU
From the “Home” screen, access to the “Factory” menu by pressing the following icone.
Restricted access, only available by production operator. The access is protected by a password.
7.10
« D
IAGNOSTIC
»
MENU
From the “Home” screen, access to the “Diagnostic” menu by pressing the following pictogram (on the right).
Diagnostic Menu
Temperature of the top sensor (Optional)
Temperature of the bottom sensor (analogue gauge).
Ambient temperature (optional)
Instant power consumption (analogue gauge), in Watts.
