24
*
CP1: Stage 1 (bottom) compressor
CP2: Stage 2 (top) compressor
Compressor usage rate: compressor operating time relative to
the total operating time of the unit (e.g. 98%).
Compressor usage time, in hours (e.g. 23).
Number of door apertures, and average duration of the door
aperture (e.g. 0min20sec).
NB: During the last 24 hours, the data is up-dated every hour
Electrical power consumption of the unit (e.g. Wh).
Temperature evolution for the last 10 hours.
Display the following screen:
The graph shows the actual temperature
(T°C), the high (Alm H) and low alarm
(Alm L) levels and the temperature
setpoint (Set).
Temperature graph
Access to defaults record.
Display the following screen:
List of the 10 last alarms recorded
including nature of default, date and
time when default occurs.
Error codes are listed in the first
column.
Fault history
Return to previous menu
7.8
« C
ONFIGURATION
»
MENU
From the “Home” screen, access to the “Configuration” menu by pressing the following pictogram (on the right).
Enter the access code (5 digits).
Default code: “11111”.
Confirm.
