4
Wireless remote control function
•
Transmitter
•
Use battery: DC 12V
•
Working distance: 30meters (the distance can be influenced by
signal interference)
•
Receiver:
•
The receiver was fixed in the machine body, and tested one by one before shipping.
Wireless controller (W-4) function and setting:
•
W-4 can be used directly to control the machine. Press “ON”, start working; Press “OFF”, stop
working.
•
A maximum of 5 transmitters can be remembered and stored by the receiver.
•
After turning on the machine, within 15 seconds, press the transmitter ON button.
•
When the digital display twinkling twice, that means the transmitter matches the machine
successfully.
•
If no transmitter matched the machine after power in, the receiver will recognize the last one.
If new transmitter matched the machine after power in, the receiver will only recognize the new
one, all the previous setting will be cleared away.
DMX Function
•
Channel 1: Fan output: 0~5 Off; 11~255 increase
•
Channel 2: Haze output:0~10 Off; 11~255 increase
•
When the unit is connected to DMX, the digital display will show the DMX address value.
•
Pressing UP and DOWN button will change the DMX address.
OTHER FUNCTIONS
•
For the channel of haze output, timing function of continuous and interval time can use DMX
console programming to achieve, or DMX control software used by dimmer to realize.
•
Fluid Sensor Protection Function - In this machine, use the program control to detect whether there
is fluid in the tubing to protect the pump.
•
Start Fluid sensor - When the smoke output is more than 50%, and the fluid tubing runs dry, the
machine will start fluid sensor in 5 minutes. The pump will stop working and the LCD display will be
flashing.
•
Remove the fluid Sensor Status - In the status of fluid sensor, there is 2 ways to remove the fluid
sensor after full of the fluid tank.
