5
OTHER FUNCTIONS (Continued)
•
When controlling the volume output with the knob switch, first to adjust the output to 0, then
adjust to 100. The machine resume output and exit the fluid sensor in 2 minutes.
•
When controlling via DMX, first push channel 2 low (OFF), then push up (ON). The machine resume
output and exit the fluid sensor in 2 minutes.
Attention
：
If the machine has little or no output or the pump excessively buzzes, please disconnect the power. Check
the fluid tank, fuse and power, if all above are fine, resume power and hold the wireless controller “ON” for
30 seconds and see if haze is emitted. In the case of no haze output, check the tube connected to the fluid
tank and make sure fluid is present. If the issue still persists, please contact the manufacturer for further
instruction.
Product Overview
1. Hanging Bracket
2. Safty ring
3. Nozzle
4. Fluid container
5. Bracket Knob
6. Fluid level indicator
7. Antenna
8. Digital display
9. Fan adjustment
10. Haze adjustment
11. Power Socket
12. Power switch
13. 3-pin DMX socket
14. Fan
