Translation of the original instructions
57
FRIULINOX ALI GROUP S.R.L. A SOCIO UNICO
Via Treviso 4 - 33083 Taiedo di Chions (PN) - Italy
Service
M
an
u
al
5.
Remove the fan by loosening the corresponding fixing
screws.
6.
Mount the new fan.
To facilitate the insertion of screws in
uncomfortable positions, use magnetised screwdriver or
put some sealant on the tip of the tool.
7.
Loosen the two knurled knobs located on the ends of
the front lower side.
8.
Remove the front panel by pulling the upper part
towards you.
9.
Recommendation:
take advantage of the operation
to check the cleanliness of the condenser filter and
clean it if required (see Par.
10.
Remove the electrical power box lid.
Keep the screws aside as they are specific to avoid
damaging the cables.
