9.2.1 Replacing the V-belt
m Open-ended wrench - size 17
n Cross-head screwdriver
o Hex wrench - size 10
1.
Remove the 6 fastening screws from the belt guard (6) using the
screwdriver (n), lift it off and place it to the side.
2.
Remove the 6 fastening screws from the belt guard (6) using the
screwdriver (n), lift it off and place it to the side.
3.
Use the hex wrench to undo the 4 cylinder-head screws (H) on the
motor's adapter plate (24).
Tools
Maintenance
- 46 -
