7.3 Crushing and grinding in combination with the Disk Mill PULVERISETTE 13 premium
line
To crush coarse material for subsequent use more finely than is possible
with a jaw crusher, it is connected to the Disk Mill PULVERISETTE 13 pre-
mium line.
Crushing with this combination takes place in a single cycle with a feed
size of 95 mm (or 65 mm) up to an average particle size (d
50
) of 0.1 mm.
The jaw crusher is placed on a mounting rack (order no.: 43.6000.00)
above the disk mill. The material pre-crushed in the jaw crusher slides
along a special chute directly into the funnel of the disk mill.
Accessories
- 42 -
