6.3.2 Replacing the crushing plate of the movable crushing jaw
Tools
a
Crank
b Threaded spindle
c
Hex wrench - size 6
NOTICE!
To replace or change the movable crushing plate (21),
use the tools provided.
1.
Pull out the source material container (8).
2.
Open the lid (7).
3.
Remove the fixed crushing jaw (13). See
‘Replacing the crushing plate of the fixed crushing jaw’ on page 29.
4.
Turn the guide pin of the guide plate (3) in such a way that its
groove is above the position screw and provides access to the
guide pin (3). See also
Chapter 6.1.5 ‘Adjusting the guide plate’
5.
Then, pull the guide pin (3) out of its guide. The guide plate is now
no longer locked and the crushing jaw (13) can be pulled up using
the special tool.
6.
To do this, insert the lug of the threaded spindle (b) in the hole of
the pull plate.
Replacing
Using the device
- 31 -
