Fristam Pumps PM 01, Original Instructions Manual

Page: 8 / 38

/ / PM POWDER MIXER / / /
8
► Always wear ear protectors in the vicinity of the running powder mixer.
► The local noise exposure regulations must be complied with.
►
See the noise emission values for the pumps in the attached operator's manuals.
Danger of Crushing When Moving Powder Mixer on Casters
Foot injuries from being run over by casters.
► Wear safety shoes.
Cold Firefighting Water on Hot Pump
Material damage from bursting of pump.
►
Do not cool the pump down excessively when extinguishing a fire.
Unsuitable Working Height or Direction
Danger of injury when working on raised table.
► Lift the powder bag using a suitable aid.
► Place a working platform beside the table and use.
►
Work on the side of the table designated for this purpose.
2.4 Labels
► Do not alter or remove the labels on the powder mixer.
► Immediately replace damaged or lost labels with ones that are true to the originals.
2.4.1 Safety Labels
Fig. 1 "Hot Surface"
The "Hot Surface" label indicates that parts can become hot during operation or, if applica-
ble, that a hot base medium is being pumped. Check the temperature before touching the
pipes. Only touch the pipes if you are wearing suitable gloves.
Fig. 2 "Do Not Reach Into Funnel"
The "Do Not Reach In" label indicates that the funnel must not be reached into during opera-
tion. There is a danger of injury in the region of the valve.
Fig. 3 "Do Not Bend Over Funnel"
The "Do Not Bend Over Funnel" label indicates that breathing in of dust or aerosols above
the funnel must be avoided. Dust and aerosols can irritate the respiratory tract. Wear a dust
mask if necessary.
Fig. 4 "Do Not Place Small Parts in Funnel"