Fristam Pumps PM 01, Original Instructions Manual

Page: 19 / 38

19
4.2 Moving With Industrial Truck
Preparation
► Ensure that the powder mixer is on the correct pallet and adequately secured.
Procedure
1. Pick up the pallet with the forks on the industrial truck.
2. Carefully move the pallet to the designated location and set down.
4.3 Moving With Crane
Falling Parts
Death from crushing, pinching of extremities, material damage.
► Only use hoists that are designed for the total weight of the powder mixer.
► Ensure that the area below the powder mixer is clear of people.
Swinging Parts
Crushing and serious injuries.
► Start and stop the crane with powder mixer smoothly.
►
Ensure that the danger zone of the powder mixer is clear of people.
Auxiliary Equipment
Hoists: round slings tested in accordance with DIN EN 1492-1 and 1492-2
Procedure
1. Wrap the round sling twice around the frame of the powder mixer.
2. Guide both loops to the crane hook and rotate by 180° to ensure that the belt will not
slip on the hook.
3. Position the center of gravity to ensure that the powder mixer is lifted horizontally.
4. Lift the powder mixer.
5 Storage
5.1 Safety Instructions
► Follow the instructions in the operator's manuals for the powder mixer components.
5.2 Storage Conditions
► Store the powder mixer as follows:
– Dry, in low humidity
– Protected against frost and heat, optimally at a temperature of 20°C to 25°C
– Ventilated