manualshive.com logo in svg

Fristam Pumps PM 01, Original Instructions Manual

Share
Download
Fristam Pumps PM 01 Original Instructions Manual Download Page 10

/  /  PM POWDER MIXER

 

/  /  /

10

Wear ear protectors when using the powder mixer with pumps or shakers with specified 
sound pressure levels of greater than 80 dBA. See 

Chapter

 

10.1.2, "Noise Emissions," page

 28

 

and the operator's manual for the vibratory motor. 

2.6

Disposal

►

Follow the instructions in the operator's manuals for the powder mixer components.

2.6.1

Disposal of Transportation Package

►

Recycle the transportation package.

2.6.2

Disposal of Grease

►

Dispose of grease and objects saturated with grease in an environmentally friendly man-
ner in accordance with applicable regulations.

2.6.3

Disposal of Lubricating Oil 

►

Dispose of oil and objects saturated with oil in an environmentally friendly manner in ac-
cordance with applicable regulations.

2.6.4

Disposal of Powder Mixer

1. Carefully clean the powder mixer. Dispose of residues in an environmentally friendly 

manner in accordance with applicable regulations.

2. Dismantle the powder mixer into its constituent parts.

3. Dispose of the components in an environmentally friendly manner in accordance with 

applicable regulations.

2.6.5

Disposal of Electrical and Electronic Scrap

►

Dispose of electrical and electronic scrap in accordance with applicable directives.

Summary of Contents for PM 01







































Reviews:

No comments

Brands by name

Popular brands

Load more brands