Fristam Pumps FKL 15, Original Instructions Manual, Page: 34 / 40

/ / FKL PUMP SERIES / / /
34
12 Appendix 2 – Assembly Instructions
(Optional)
12.1 Safety Instructions
These assembly instructions are addressed solely to specialized
employees.
12.2 Scope
These assembly instructions apply to pumps supplied without
motors (optional). The pump is initially an incomplete machine.
Fig. 42 Incomplete machine: pump without motor, coupling, or base frame
The following specifications in the "Original Operator's Manual"
for complete machines do not apply in this case:
– Chapter 11.5, "EC Declaration of Conformity," page 33 ,
– Chapter 11.1.2, "Maximum Discharge Pressures," page 28 ,
– Chapter 2.5.3, "Rating Plate," page 7 .
12.3 Rating Plate
Fig. 43 Rating plate for pump without drive
12.4 Moving Without Motor
Transportation may only be performed by trained personnel.
The pump can be moved using an industrial truck or a crane.
Always move the pump in the installation condition.
12.4.1 Safety Instructions
Falling or Unsecured Parts
Severe crush injuries.
► Always wear gloves when performing transportation-related
work.
Incorrect Positioning of Pump for Transportation
Leakage of caustic, toxic, or contaminating liquids. Personal in-
jury and material damage from contamination.
►
Always move the pump in the installation condition.
Open, Unsealed Pipe Fittings
Material damage from contamination, impact, or moisture in the
pump.
►
Remove the pipe fitting covers just prior to connection to
the pipes.
12.4.2 Moving With Industrial Trucks
WARNING
Unsecured Parts
Death from crushing, pinching of extremities, material damage.
► Before moving the pump secure it to prevent it from tipping
over. Secure the pump to the pallet with tie-down straps, or
screw the pump to the pallet.
Preparation
► Ensure that the pump is adequately secured to the pallet, for
example, with straps; see
Fig. 44, "Moving with pallet truck,"
page 35 .
Procedure
1. Pick up the pallet with the forks on the industrial truck.
2. Carefully move the pallet to the designated location and set
down.
58
Manufacturer
59 Type: pump series, pump size, model, version
60 SN: serial number of the pump
61 H: discharge head [m]; without drive: no indication
62
P:
motor output [kW]; without drive: no indication
63 Year of manufacture
64
m:
mass (pump without drive) [kg]
58
59
60
63
61
64
65
66
62
65
n
R
:
rated speed [1/min]; without drive: no indication
66 Q: flow rate [m³/h]; without drive: no indication