6
PREPARE THE HOOD
11
Remove appropriate
Duct Knockout(s)
from top or back of
hood.
REAR
RECTANGULAR
DUCT KNOCKOUT
(Remove for 3¼” x 10”
Horizontal Discharge)
TOP RECTANGULAR
DUCT KNOCKOUT
(Remove for 3¼” x 10”
Vertical & for 7” Round
Discharge)
SEMI-CIRCULAR
DUCT KNOCKOUT
(Remove for 7” Round
Discharge)
12
Horizontal Discharge Only: Remove the
Plate
in front of the
horizontal discharge knockout. Cut the
Ties
, lift plate out,
and discard plate. DO NOT REMOVE the
Metal Strip
held in
place with two
Screws
.
TIES
PLATE
METAL STRIP
SCREW
PREPARE THE HOOD
14
7” Round Ducted Discharge Only: Re-install
7” Round Duct
Plate
removed in Step #1 under “PREPARE THE HOOD”.
Install a 7” round damper (purchase separately). Damper flap
must open freely in direction of airflow (away from range
hood).
13
3¼” x 10” Ducted Discharge Only: Remove
Tape
