background image

9

Care and Cleaning

Keep your freezer clean to prevent odor build-up. Wipe 

up any spills immediately and clean at least twice a year. 

Never 

use metallic scouring pads, brushes, abrasive 

cleaners or strong alkaline solutions on any surface. 

do 

not

 wash any removable parts in a dishwasher. 

Always 

unplug the electrical power cord from the wall outlet 
before cleaning.

       

CauTiON

•  When moving the freezer, pull straight out. Do not 

shift the freezer from side to side as this may tear 
or gouge the floor covering. 

•  Damp objects stick to cold metal surfaces. Do not  

touch interior metal surfaces with wet or damp 
hands.

       

NOTE

•  Turning the freezer temperature control to “OFF” turns 

off the compressor, but does not disconnect electrical  
power to the light bulb or other electrical components. 
To turn off power to your freezer, you must unplug the  
power cord from the wall outlet.

•  Do not use razor blades or other sharp instruments 

which can scratch the appliance surface when 
removing adhesive labels. Any glue left from tape or 
labels can be removed with a mixture of warm water 
and mild detergent, or, touch the glue residue with the 
sticky side of tape you have already removed. Do not 
remove the serial plate.

Care & Cleaning Chart 

Part 

What To Use 

Tips and Precautions 

Interior/Door 

Liner 

x

Soap and water 

x

Baking soda and water 

Use 2 tablespoons of baking soda in 1 quart of warm water

. Be sure to 

wring  excess  water  out  of  sponge  or  cloth  before  cleaning  around 
controls, light bulb or any electrical part.

 

Door Gaskets 

x

Soap and water 

Wipe gaskets with a clean soft cloth. 

Drawers/Bins 

x

Soap and water 

Do not wash any removable items (bins, drawers, etc.) in dishwasher. 

Glass Shelves 

x

Soap and water 

x

Glass cleaner 

x

Mild liquid sprays 

Allow glass to warm to room temperature before immersing in warm 

water. 

Exterior and 
Handles 

x

Soap and water 

x

Non Abrasive Glass  

        Cleaner 

Do not use commercial household cleaners, ammonia, or alcohol to clean 
handles. Use a soft cloth to clean smooth handles. 

Do Not use a dry 

cloth to clean smooth doors. 

Exterior and 
Handles 

(Stainless 
Steel Models 

Only) 

x

Soap and water 

x

Ammonia 

x

Stainless Steel 
Cleaners 

Clean stainless steel front and handles with soapy water and a dishcloth. 
Rinse with clean water and a soft cloth. Wipe stubborn spots with an 

ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless 

steel cleaner. These cleaners can be purchased at most home 
improvement or major department stores. Always follow manufacturer's 

instructions.      

NOTE: Always clean, wipe and dry with the grain to prevent cross-

grain scratching.

 Wash the rest of the cabinet with warm water and mild 

liquid detergent. Rinse well, and wipe dry with a clean soft cloth. 

Summary of Contents for GLFH1779GW - 16.7 cu. Ft. Upright Freezer














Reviews: