background image

2

Welcome & Congratulations

Congratulations on your purchase of a new freezer! We 
are very proud of our product and we are completely 
committed to providing you with the best service possible. 
Your satisfaction is our #1 priority.

We know you’ll enjoy your new freezer and 

Thank You

 for 

choosing our product. We hope you consider us for future 
purchases.

plEasE REad aNd savE ThEsE 
iNsTRuCTiONs

This Owner’s Guide provides specific operating 
instructions for your model. Use your freezer only as 
instructed in this manual. These instructions are not 
meant to cover every possible condition and situation 
that may occur. Common sense and caution must be 
practiced when installing, operating and maintaining any 
appliance.

please record your model and serial numbers below 
for future reference. This information is found on the 
serial plate located inside the freezer compartment.

       

NOTE

Use only soap and water to clean serial plate.

Model Number:

Serial Number:

Purchase Date:

plEasE COmplETE aNd mail iN ThE 

pROduCT REgisTRaTiON CaRd iNCludEd 

wiTh YOuR fREEzER.

versión en español

Si desea obtener una copia en español de este 
Manual del Usuario, sívase escribir a la dirección que 
se incluye a continuación. Solicite la P/N 297211000.

Spanish Owner’s Guides

Electrolux Home Products

P.O. Box 212378

Augusta, GA 30917

Summary of Contents for GLFH1779GW - 16.7 cu. Ft. Upright Freezer














Reviews: