background image

2

Welcome & congratulations

note

Please attach sales receipt here for future reference.

Please record your model and serial numbers 

below for future reference.

Model Number: 
Serial Number: 
Purchase Date: 

© 2016 Electrolux Home Products

  All rights reserved

  Printed in China

Congratulations on your purchase of a new appliance! At 

electrolux Home Products

, we are very proud of our 

product and are completely committed to providing you 

with the best service possible. Your satisfaction is our 

number one priority.
We know you’ll enjoy your new appliance and 

thank You

 

for choosing our product. We hope you consider us for 

future purchases.

Please careFullY read and save tHese 

instructions

This Use & Care Manual contains general operating 

instructions for your appliance and feature information 

for several models. Your product 

may not

 have 

all the described features. The graphics shown are 

representative. The graphics on your appliance may not 

look exactly like those shown. These instructions are not 

meant to cover every possible condition and situation 

that may occur. Common sense and caution must be 

practiced when installing, operating and maintaining any 

appliance.

Product registration

serial Plate location

Cooktop Serial 

Plate Location

register Your Product

The 

Product 

registration card

 

should be filled in completely, 

signed and returned to 

Electrolux Home Products.

Summary of Contents for FPIC3077RF

















Reviews: