background image

13

care & cleaning

cleaning recommendations for the 

ceramic glass cooktop

For light to moderate soil:

Apply a few drops of cleaning creme directly to the 

cooktop. Use a paper towel or use a 

non-abrasive

 

plastic type 

no-scratch

 pad to clean the entire cooktop 

surface. Make sure the cooktop is cleaned thoroughly, 

leaving no residue.

For heavy, burned on soil:

Apply a few drops of cleaning Creme directly to the soiled 

area. Rub the soiled area using a 

non-abrasive

 plastic 

type 

no-scratch

 pad, applying pressure as needed. Do 

not use the pad you use to clean the cooktop for any 

other purpose.

do not use the following on the ceramic glass 

cooktop:

•  Do not use abrasive cleaners and scouring pads, 

such as metal and some nylon pads. they may 

scratch the cooktop, making it more difficult to 

clean.

•  Do not use harsh cleaners, such as chlorine 

bleach, ammonia or oven cleaners, as they may 

etch or discolor the cooktop.

•  Do not use dirty sponges, cloths or paper 

towels, as they can leave soil or lint on the 

cooktop  which can burn and cause special 

caution for aluminum Foil and aluminum 

cooking utensils

Warning

do not

 use a cooktop cleaner on a hot cooktop. 

The fumes can be hazardous to your health, and can 

chemically damage the ceramic glass surface.

caution

Before cleaning the cooktop, be sure the controls are 

turned to 

oFF

 and the cooktop is COOL.

• 

aluminum foil

 

Use of aluminum foil will damage the cooktop. Do not 

use under any circumstances.

• 

aluminum utensils

 

Since the melting point of aluminum is much lower 

than that of other metals, care must be taken when 

aluminum pots or pans are used. Pans that boil dry 

may permanently damage cooktop by breaking, fusing 

to, or marking it.

care and cleaning of stainless steel

Some models are equipped with stainless steel exterior 

parts. Special care and cleaning are

 required

 for 

maintaining the appearance of stainless parts. Refer 

to the 

general care & cleaning 

table for detailed 

cleaning instructions.

imPortant

Damage to the ceramic glass cooktop may occur if you 

use an abrasive type scratch pad. Only use cleaning 

products that have been specifically designed for 

ceramic glass cooktop.

If soils remain, carefully scrape soils with a metal razor 

blade scraper, holding scraper at a 30 degree angle to the 

surface. Remove loosened soils, then apply a few drops 

of cleaning cream and buff surface clean. 

Plastic or foods with a high sugar content:

These types of soils need be removed immediately if 

spilled or melted onto the ceramic cooktop surface. 

Permanent damage (such as pitting of the cooktop 

surface) may occur if not removed 

immediately

. After 

turning the surface elements OFF, use a razor blade 

scraper or a metal spatula with a mitt and scrape the soil 

from the hot surface (as illustrated). Allow the cooktop to 

cool, and use the same method for heavy or burned on 

soils.

Summary of Contents for FPIC3077RF

















Reviews: