9
Operating Instructions
Operating Instructions
(continued)
TO TURN UNIT OFF:
2009 Electrolux Home Products, Inc.
All rights reserved.
YOU WILL SEE:
ADDITIONAL THINGS YOU SHOULD KNOW
DO THIS:
PRESS
ON/OFF BUTTON
EXHAUST CONTROL
This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside (OPEN).
The CLOSED position is used when maximum cooling is desired. It may also be used for air recirculation without cooling when the
air conditioner is set in any FAN position.
The OPEN position removes stale air from the room and exhausts it to the outside. Fresh air is drawn in through normal passages
in the home.
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time.
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having
to roll through to select another mode.
After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
TO CHANGE TEMPERATURE DISPLAY:
YOU WILL SEE:
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
Note: If the unit is turned off in heat mode (if applicable) or
fan only mode, it will return to the same setting when it is
turned on again. When the unit is turned off in cool or energy
saver mode, it will run in energy saver mode when it is turned
on again, but the setting of temperature and fan speed will
remain.
