background image

Operating Instructions, Care and Cleaning & Energy Saving Ideas

10

2009 Electrolux Home Products, Inc.

All rights reserved.

Energy Saving Ideas

Do not block air flow inside with blinds, curtains or furniture; or outside with
shrubs, enclosures, or other buildings.

The capacity of the room air conditioner must fit the room size for efficient and
satisfactory operation.
Install the room air conditioner on the shady side of your home. A window that faces
north is best because it is shaded most of the day.
Close the fireplace damper, floor and wall registers so cool air does not escape up
the chimney and into the duct work.
Keep blinds and drapes in other windows closed during the sunniest part of the day.
Clean the air filter as recommended in the section “Care and Cleaning”.
Proper insulation and weather stripping in your home will help keep warm air out
and cool air in.
External house shading with trees, plants or awnings will help reduce the air
conditioner’s work load.
Operate heat producing appliances such as ranges, washers, dryers and dishwashers
during the coolest part of the day.

Care and Cleaning

Clean your air conditioner occasionally to keep it looking new. 

Be sure to unplug

the unit before cleaning to prevent shock or fire hazards.

Cabinet Cleaning

Be sure to unplug the air conditioner to prevent shock or fire hazard. The
cabinet and front may be dusted with an oil-free cloth or washed with a cloth
dampened in a solution of warm water and mild liquid dishwashing detergent.
Rinse thoroughly and wipe dry.
Never use harsh cleaners, wax or polish on the cabinet front.
Be sure to wring excess water from the cloth before wiping around the controls.
Excess water in or around the controls may cause damage to the air conditioner.
Plug in air conditioner.

Winter Storage

If you plan to store the air conditioner during the winter, remove it carefully from
the window according to the installation instructions. Cover it with plastic or return
it to the original carton.
NOTE:To prevent rust or electrical connections from being damaged, store air 
conditioner in an upright position and a dry place.

Air Filter Cleaning

The air filter should be checked at least once a month to see if cleaning is
necessary. Trapped particles in the filter can build up and cause an accumulation
of frost on the cooling coils.

Grasp the filter by the center and pull up and out.

Wash the filter using liquid dishwashing detergent and warm water. Rinse filter
thoroughly. Gently shake excess water from the filter. Be sure filter is
thoroughly dry before replacing

Or instead of washing, you may vacuum the filter clean.

Operating Instructions

(continued)

4-WAY LOUVERS

The 4-Way  air directional louvers allow you to direct 
the air flow Up or Down and Left or Right throughout 
the room as needed. 

Summary of Contents for FFRS1022R1













Reviews: