15
CONTROLS
options
(
∧
or
∨
)
Used to enter and exit the options
menu and make selections.
exit
Toggles the options and run modes.
control
locked
While in the locked state, you will not
be able to change any settings on the
display nor dispense ice and water. The
“Control Locked” indicator will flash and
an audible warning tone is played.
quick freeze
on off
Activates a faster rate for freezing food
and increases ice production in the
freezer. Deactivates after 12 hours.
ice maker
on off
Toggles the ice maker “ON” or “OFF”. In
the “Ice Off” state, indicator will blink
when ice is dispensed.
display
on off
Toggles the temperature displays On
and Off.
refrigerator
temp
Allows the temperature set-points to be
adjusted. Control temperatures range
from +33° F / +1° C to +47° F / +8° C.
freezer
temp
Allows the temperature set-points to be
adjusted. Control temperatures range
from -6° F / -21° C to +6° F / -15° C.
mode ° F ° C Toggles display from Fahrenheit to Celsius.
light
Toggles dispenser light On and Off.
power off
Press and hold for three seconds
to turn off the cooling system. It
also turns off the ice maker and all
dispenser functions. The display will
read “power off”.
water filter
Displays the current status of the water
filter (Good, Order, or Replace). To reset
the filter status to “Good”, press and
hold the “set” key for three seconds.
air filter
Displays the current status of the air
filter (Good, Order, or Replace). To reset
the filter status to “Good”, press and
hold the “set” key for three seconds.
default
settings
While in the default option, press and
hold the set key for three seconds to
reset all refrigerator settings to their
factory default settings.
set (+ or -)
Selects the current menu selection option.
water
Press the “water” key to select water. A
green indicator light will be illuminated
above the active feature.
cube
Press the “cube” key to select cubed
ice. A green indicator light will be
illuminated above the active feature.
crush
Press the “crush” key to select crushed
ice. A green indicator light will be
illuminated above the active feature.
