Frigidaire FFHB2740PE Page 34 Use And Care Manual Download

Page: 34 / 40

CARE & CLEANING

Ice Chute Extension

(select models)

The ice chute extension is designed to better

direct ice flow into containers.

Push Upward Until the

Extension Snaps In Place

Pull Down

Press Here

Firmly

Installing the Ice Chute Extension

1 Turn the refrigerator off using the

button on the control panel (refer to the

“Controls” section of this Manual).

2 Align the extension with the ice chute so

that the snap clips are just inside the front

edge of the chute.

3 Push upward until the extension snaps

into place.

4 Turn your refrigerator back on.

Removing the Ice Chute

Extension For Cleaning

1 Turn the refrigerator off using the

button on the control panel (refer to the

“Controls” section of this Manual).

2 Press inward firmly on the front of the

chute and pull down.

3 Turn your refrigerator back on.

Summary of Contents for FFHB2740PE









































Search results

Summary of Contents for FFHB2740PE

Reviews:

Related manuals for FFHB2740PE

Brands by name

Popular brands

Frigidaire FFHB2740PE, Use And Care Manual

Search results

Summary of Contents for FFHB2740PE

Reviews:

Related manuals for FFHB2740PE

Brands by name

Popular brands