background image

15 

 

REMOTE CONTROL

 

1.

 

Open the battery cover on the back of the remote control 
and install a CR2032 3V battery.  

2.

 

Aim the remote at the receiver when using. 

3.

 

When the battery needs to be replaced, pull it out and away 
from the remote. Pay attention to the positive and negative 
terminals of the battery when replacing the battery. Put the 
battery cover on to reset the remote for usage. 

 

ICE PACKS

 

 

 
The included ice pack has a unique cold storage and heat 
preservation property which slowly absorbs the heat in the water 
and makes the water temperature in the water tank lower than 
the ambient temperature.  
1.

 

Place the ice pack in the freezer until it is completely frozen. 

2.

 

Insert the frozen ice pack into the water tank and push the 
water tank back into place. After about ten minutes, the 
water temperature in the water tank will be lower than the 
ambient temperature. 

3.

 

Do not break open or modify ice packs in any way

ice packs 

already contain a freezing gel and do not need to be opened. 
Place ice packs in the freezer overnight prior to use, for 
maximum cooling effect. Frozen ice packs should be placed 
directly into the water tank, out of the way of the water tank, 
to prevent obstruction or damage. 

Summary of Contents for FEC180WH00



















Reviews: