11
TROUBLESHOOTING GUIDE
Water leakage
The drain plug is not in place.
The seal has reached the end of its
service life.
Pipe joints in the appliance may
loose.
Put the drain plug in place.
Verify by a qualified
technician.
Verify by a qualified
technician.
The ambient temperature or
thewater temperature in the
inner tankis too high.
Refrigerant liquid leakage.
Refrigeration system malfunctions.
Cover motor is broken
The pipe in the cooling system is
blocked.
Please run the ice maker when
the ambient temperature is
below 90 °F and pour colder
water into the tank.
PROBLEM
POSSIBLE CAUSES
SOLUTION
“ ” is lightening
on and the arrow
flashes.
Lack of Water.
E1
Making Ice too
slowly
Stop the ice maker, fill
water, and press “ICE/
CLEAN” button again
to restart the unit.
Remove the probable
obstacle inside or clean
the inside wall of the ice
storage.
Press the ICE button twice,
restart ice making program,
if this problem show up
again, verify by a qualified
technician.
Hot Air outlet must be
guaranteed to have more
than 15 CM of ventilation.
Press “ICE/CLEAN” button
for 5 seconds
，
it will
work for 80 minutes.
Remove some ice cubes.
Verify by a qualified
technician.
Water temperature
requirement between
44.6°F -89.6°F.
There are too much ice cubes.
(If, no ice cube inside).
Hot Air outlet has been blocked
by something.
The water temperature in inner
tank is too high.
“ ” symbol is
lightening and
letter “F” flashes.
