manualshive.com logo in svg

Friendly Robotics RL500, Owner'S Operating Manual

Share
Download
Friendly Robotics RL500 Owner'S Operating Manual Download Page 25

Chapter 10 - Warnings and Safety Precautions

10.16 Servicing Your RL500

Allow only authorized RL500 technicians to service your unit. Do not attempt to

open RL500, as it will void your warranty. Altering RL500 parts will void your
warranty.

10.17 Cleaning Your RL500

Use only a damp cloth or soft brush to clean your unit. Using a garden hose or

power-washer may damage the on-board electronics.

Note: Disregarding these instructions could be dangerous and could lead to the warranty being
voided.

10.18 Warning Decal Definitions

1. Warning - A power tool to be handled carefully. 
2. Read manual carefully and follow its safety instructions. 
3. Be careful of flying objects.
4. Keep children at a safe distance. 
5. Keep hands away from blades underneath. Do not lift RL500 from this area!
6. Keep legs away of sharp blade underneath.

7. Keep hands away from blades underneath. Do not lift RL500 from this area!

Chapter ten

10.2

Sales: 1-877-404-7626

Support:  1-877-669-2687

Friendly Robotics 

Technician Assistance:

1-877-MOW-BOTS

1-877-669-2687

1

2

3

4

5

6

7

SMARTHOME.COM™  1-800-SMART-HOME  949-221-9200  http://www.smarthome.com  Order #3256

Summary of Contents for RL500



























Reviews:

No comments

Brands by name

Popular brands

Load more brands